Viraloc Single-use Medical Masks

Our single-use 3-ply face masks are designed to protect both the user and the surrounding environment by capturing expelled contaminants in its lightweight and disposable material.

Available in Medical Level 1, Level 2, Level 3, and Non-medical.

Made for comfort

Loose fitting with elastic ear loops

Lightweight

Easy to breathe through

Nose clip wire

Bendable, shape to fit

Technical specifications

 

Level 1

 

Level 2

 

Level 3

 

Standards tested

 

Bacterial filtration efficiency (BFE%) ≥95% ≥98% ≥98% ASTM F2101
Particle filtration efficiency (PFE%) ≥95% ≥98% ≥98% ASTM F2299
Differential pressure (Δp mm H20/cm2) <5.0 <6.0 <6.0 EN 14683 Annex C
Splash resistance (mmHg) 80 120 160 ASTM F1862
Flame spread Class 1 Class 1 Class 1 16 CFR Part 1610
Instructions for Use
  1. Hold mask by ear loops with the nose clip at the top. Ensure the logo side or colored side is facing outward. Place one ear loop around each ear.
  2. Bend the nose clip to match the shape of the nose and ensure there are no gaps.
  3. While holding the nose clip at the bridge of your nose, pull the mask down under your chin.
  4. Properly dispose of the mask by touching only the ear loops.
Indications for Use

Intended to be worn to protect both the patient and healthcare professional from transfer of microorganisms, body fluids, and particulate material. To be used in infection control practices to reduce the potential exposure to blood and body fluids. This is a single use, non-sterile, disposable device.

Notice

To the extent permitted by law, Precision ADM Inc. and Precision ADM Medical Inc. shall not be liable for any loss or damage including any loss of business, loss of profits, or for any indirect, special, incidental or consequential loss or damage arising from reliance upon any information herein provided. Nothing in this statement will be deemed to exclude or restrict Precision ADM’s liability for death or personal injury arising from its negligence. Non-sterile product.

Warnings and limitations
  1. Only for one-time use, please destroy and dispose according to regulations after use.
  2. Do not use if package is damaged.
  3. Please refer to the instructions before use.
  4. Use this product immediately after the package is opened. Avoid hand contact within the interior part of the mask.
  5. Do not wash.
  6. Procedural masks are not intended to provide protection against pathogenic biological airborne particulates.
  7. Procedural masks are not recommended for use in aerosol generating procedures and any clinical conditions where there is significant risk of infection through inhalation exposure.
  8. Non-sterile
  9. Failure to follow instructions may lead to transfer of microorganisms, blood and body fluids, and particulate materials.